What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
Do you find yourself hunting for suggestions concerning Hot Water Heater Repair?
Lots of modern houses make use of an electric hot water heater for their heater, due to its comfort as well as convenience of use. Nevertheless, just like any other electric home appliances, problems might arise with its use, unexpectedly. It can be truly irritating to wake up to a cool shower instead of a hot one or having your bathroom with water that isn't hot adequate or even as well warm. Whatever the case might be, hot water heater problems can be rather aggravating. Thankfully, we have actually made a list of possible options to your water heater problems. There are a variety of factors that might cause much of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for safety. Whatever the issue is, getting it dealt with must not pose excessive of a concern if you follow these actions:
Examine Your Power Supply:
As basic as this might appear, it is very needed. Without ample power, your water heater will not operate. So the first thing to do when your water suddenly stops working is to validate that it isn't a power trouble. Check if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, merely turn it off and on once again. Change any broken or worn-out fuse. Check the appliance with power after these changes to see if it's now functioning.
Examine the Heating Element in the Water Heater:
If it's not a power issue, after that attempt checking out your burner if it is still functioning. Test each of your heating elements to make sure the issue isn't with any one of them. If any one of them is damaged, change that part and then check whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't working or the water appearing isn't warm sufficient, you might require to check the temperature settings on your upper thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature level reset over the thermostat. This should help heat the water. Turn the circuit breaker back on and check if the problem has been dealt with.
Call An Expert:
If after replacing all defective parts as well as resetting your temperature, the water heater still isn't working, you may need to get in touch with an expert plumber for a specialist point of view. The trouble with your heating system could be that the cold and hot faucets have been changed or it may be undersized for the amount of hot water required in your house. Whatever the instance might be, an expert plumber would aid fix the issue.
Conclusion
Hot water heater troubles are not always major. Most of them result from minor concerns like a blown fuse or damaged burner. Changing the malfunctioning parts should do the trick. Nonetheless, if you are still incapable to fix the issue, give a call to your nearest plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As an avid reader on What Would Cause My Electric Water Heater to Stop Working?, I imagined sharing that article was really useful. Are you aware of somebody else who is fascinated about the subject? Take a moment to share it. We take joy in reading our article about No Hot Water — Water Heater Repair.
Article
Report this page